Turnkey Ancillary Systems for Factory-Wide Efficiency

Contact Us
Turnkey Ancillary Systems
Turnkey Ancillary Systems

Central Systems for Integrated Material Handling

Shini UK supplies Turnkey Ancillary Systems designed to connect material handling, drying and conveying processes across plastics manufacturing facilities. Our central systems help manufacturers improve process efficiency, reduce manual intervention and support consistent production performance throughout the factory. Contact us to discuss the right central system for your operation.

Discover our central material handling and drying solutions

Designing a central system involves reviewing factory layout, number of machines, materials, throughput, drying needs and future growth plans. Shini UK can support project planning through its consultancy services.

A central material handling system moves plastic material from a central supply area to multiple processing machines. It can include storage, conveying, drying and control equipment. Shini UK supplies central systems for integrated plastics manufacturing environments.

Central feeding systems use controlled conveying equipment and pipework to deliver material to different machines from a centralised source. This reduces manual loading and helps improve material flow across a facility.

Central systems improve efficiency by coordinating material feeding, drying and conveying from a single organised setup. This can reduce repeated manual tasks and support cleaner, more controlled production areas. See Shini UK central material handling solutions for more information.

Yes. A well-planned central system can be designed with future expansion in mind, allowing manufacturers to add machines, material lines or processing capacity as production requirements grow.

View Full Range

Shini can provide you the most suitable solutions from material tank to outdoor silos to you’re your space, protect your material and lower your cost.

All material contact surfaces and filter device of the system are made of stainless steel ensures no contamination during material conveying.

By adjusting conveying speed, the flexible air refilling adjusting system can avoid stringing and dusting caused by different conveying situations.

For high temperature material conveying, Shini specially came up with the solution with water-cooling function which decrease the risk of high temperature material conveying.

Closed loop of two-stage conveying system. For the conveying of materials to the hopper on injection molding machine, Shini can greatly reduce the heat dissipation and the risk of material rewetting.

Standard manual material distribution station adopts quick coupler, central material distributor and mating connector to improve system efficiency. Auto material distribution station adopts central control board which is suitable for large-scale feeding system.

SCM model of Shini is suitable for masterbatch particles both crystallized and non-crystallized with output within 0.2~32 kg/hr. If the masterbatch proportion and precision is demanding, SGD model is suggested which adopts loss-in-weight calculation with output within 0.04~32kg/hr.

Ethernet interface is attached to the SGB controller, together with the relevant software, material proportion data (max. output, actual output, proportioning accuracy) can be transmitted to control product quality. Recalibration will be automatically started after each weighing to ensure optimal proportion accuracy. Regrinds auto compensation function available. Aberration compensation can be automatically calculated based on the discharge amount of material.

In plastic molding process, drying becomes the most critical step which must be seriously taken and the moisture in the material must be removed at a reasonable temperature. Shini dehumidifying dryer can provide dew-point of -40℃ or even lower. Also it can achieve constant detection of all the parameters and stabilize the dew-point.

Dew-point of traditional dehumidifiers can not be set and the machines are working full-loaded. However, in material processing with rigorous humidity requirements, the dew-point must be set and controlled properly. Differ from traditional dehumidifier, the new Shini model combines the settable dew-point together with the regenerating control greatly saves the energy.

Contact Us

Innovation Meets
Reliability

For over 50 years, Shini has been at the forefront of plastics auxiliary equipment. We combine advanced technology with British expertise to help manufacturers streamline production, reduce costs, and enhance quality.

Why Choose Shini UK?

  • Industry-Leading Technology – Precision-engineered solutions that optimise performance

  • Customised Systems – Tailored to meet your unique processing needs

  • Expert Support – Dedicated specialists providing technical advice and aftersales service.

  • Proven Reliability – Trusted by manufacturers worldwide.

Turnkey Ancillary Systems